Quality Control

Production & Installation

As product’s quality is our priority, the production of injector control valves is very strictly controlled.

The injector control valves must be produced in dust-free workshop. The control valve’s production procedures include pre-heat treatment, post-heat treatment and CNC surface treatment. In each produce process, we strictly check every part’s quality and exclude bad quality parts so as to make sure our products meet usage standard.

Injector control valve’s Installation

When install injector control valve, there are some precautions you need to know to prevent the injector control valves working failure:

① Clean the injector control valve in an ultrasonic cleaner for 3-5 minutes before installation, so as to make the stains, dust, rust-proof oil oxides, paraffin base, naphthenic base, intermediate base,salt, lead naphthenate, zinc naphthenate, sodium petroleum sulfonate, barium petroleum sulfonate, calcium petroleum sulfonate, tallow diamine trioleate, rosinamine on the surface of the injector control valve fall off.

② Use compressed air to clean the cleaning fluid attached to the surface of the injector control valve after cleaning, and clean it up to the standard of usage. The details are as below:

● When installing the injector control valve, make sure that each part of injector control valve can be moved smoothly in it.

● If the injector control valve is not installed in accordance with the standard, it may cause serious damage to the injector control valve and injector.

Warranty

crdicontrolvalve.com has a mature business trading system, and as we all know, good service is one of main reasons to makes long term business cooperation with customers. Therefore, crdicontrolvalve.com provides services such as replace, repair, refund etc. to our customers, as well as 6-12 months of warranty period for each patch of injector control valves that sent to our customers. And when you meet product’s quality problem, we will help you to solve it until you are satisfied.